Hangzhou lianli electrical co,. ltd.
Zhejiang Axwill Electrical Co.,Ltd. Subcompany: Hangzhou Lianli Electrical Company Limited
Add to Cart
3" Insulated Compression Type EMT Coupling Electro Galvanized Quick Install With Stainless Ring
3" Compression Type EMT Coupling Electro Galvanized Quick Install With Stainless Ring
All steel construction ensures mechanical protection for the raceway
Fittings are available in 1/2" to 4" trade sizes
Zinc electroplate finish
All fittings are marked "Wet Locations" to allow inspecting authorities to immediately determine that the installation is up to code
All connectors are supplied with a factory installed knockout seal
No need to add the expense of buying a gasket separately
No need to disassemble the fitting prior to installation
AXWILL Raintight Steel EMT Compression fittings are designed so that when they come out of the carton they can be installed directly on the conduit
No need to waste time loosing compression nuts
No need for special tools to install properly
Install these fittings like any other Steel EMT Compression fitting
No need for a torque wrench to insure proper installation
The EMT fitting series is designed to provide solutions to connect steel EMT conduit to boxes and enclosures in commercial applications offered in various sizes and application types with ferrule compression or set screw providing ground continuity. It is made of steel galvanized offer corrosion resistance and are UL & CSA approved.
| Catalog | Trade Size | Metric | Outside | Inside | Body | Locknut | Quantity | Weight(kgs) |
| Number | Inch | Designator | Dia. Mm | Dia. (mm) | Thick(mm) | Thick mm | Per Carton | Per Carton |
| RL-550 | 1/2" | 16 | 20.80 | 17.95 | 1.40 | 3.00±0.20 | 250 | 10.75±1.00 |
| RL-551 | 3/4" | 21 | 27.74 | 24.88 | 1.43 | 3.00±0.20 | 250 | 16.78±1.00 |
| RL-552 | 1" | 27 | 33.61 | 30.52 | 1.55 | 3.30±0.20 | 100 | 9.10±1.00 |
| RL-553 | 1-1/4" | 35 | 43.55 | 39.81 | 1.87 | 3.46±0.20 | 25 | 4.13±1.00 |
| RL-554 | 1-1/2" | 41 | 49.34 | 45.37 | 1.99 | 3.55±0.20 | 10 | 2.10±1.00 |
| RL-555 | 2" | 53 | 60.91 | 57.14 | 1.89 | 3.55±0.20 | 15 | 3.75±1.00 |
| RL-556 | 2-1/2" | 63 | 79.84 | 74.10 | 2.75 | 4.00±0.20 | 12 | 8.66±1.00 |
| RL-557 | 3" | 78 | 96.50 | 90.50 | 2.75 | 4.00±0.20 | 6 | 6.84±1.00 |
| RL-558 | 3-1/2" | 91 | 116.40 | 101.80 | 3.00 | 4.00±0.20 | 6 | 7.29±1.00 |
| RL-559 | 4" | 103 | 123.80 | 115.02 | 3.00 | 4.00±0.20 | 6 | 8.88±1.00 |
General:
1) Steel emt compression connector is made from high quailty steel material
2) Inside tight ring is quenching finish to insure the harden when emt pipe put on
3) Come always with inside & outside lock ring/locknut
4) As UL stipulated:all the sizes need to be using corresponding item code when we appliedd the UL, C/W screw and steel locknut,come with the hot-gal.lock ring
5) Insulated emt compression connector also available
6) RANLIC EMT compression connector always keep the same and high quality
Applications:
Steel EMT compression connector is the adaptor for unthreaded emt conduit pipe
•Connect & effectively bond EMT to EMT
•May be used indoors and outdoors
•Zamak finished to avoid the inside bubbles
•UL listed for safety
•Application type : compression emt conduit adaptor
•Electrical Product Type : Standard Fitting
•Fitting type : compression type
•Paintable/Stainable : No
•Trade Size (in.) : [1/2"] [3/4"] [1"] [1-1/4"] [1-1/2"] [2"] [2-1/2"] [3"] [4"]
• Zinc alloy to ensure the products never be rusted like steel
compression coupling:
| Catalog | Trade Size | Metric | Outside | Inside | Body | Locknut | Quantity | Weight(kgs) |
| Number | Inch | Designator | Dia. Mm | Dia. (mm) | Thick(mm) | Thick mm | Per Carton | Per Carton |
| RL-560 | 1/2" | 16 | 20.80 | 18.50 | 1.40 | 3.00±0.20 | 250 | 12.50±1.00 |
| RL-561 | 3/4" | 21 | 27.74 | 24.88 | 1.43 | 3.00±0.20 | 250 | 17.50±1.00 |
| RL-562 | 1" | 27 | 33.61 | 30.52 | 1.55 | 3.30±0.20 | 100 | 10.00±1.00 |
| RL-563 | 1-1/4" | 35 | 43.55 | 39.81 | 1.87 | 3.46±0.20 | 25 | 4.50±1.00 |
| RL-564 | 1-1/2" | 41 | 49.34 | 45.37 | 1.99 | 3.55±0.20 | 20 | 4.40±1.00 |
| RL-565 | 2" | 53 | 60.91 | 57.14 | 1.89 | 3.55±0.20 | 15 | 4.20±1.00 |
| RL-566 | 2-1/2" | 63 | 79.84 | 74.10 | 2.75 | 4.00±0.20 | 6 | 5.34±1.00 |
| RL-567 | 3" | 78 | 95.20 | 89.97 | 2.75 | 4.00±0.20 | 6 | 6.48±1.00 |
| RL-568 | 3-1/2" | 91 | 105.80 | 101.80 | 3.00 | 4.00±0.20 | 5 | 7.00±1.00 |
| RL-569 | 4" | 103 | 123.80 | 115.02 | 3.00 | 4.00±0.20 | 3 | 4.80±1.00 |
You may choose following RanLic other Conduit products:
EMT CONDUIT PIPE
IMC CONDUIT PIPE
RIGID CONDUIT PIPE
FLEXIBLE CONDUIT PIPE
LIQUID TIGHT FLEXIBLE CONDUIT
EMT connector(steel,zinc),
emt coupling(steel,zinc),
compression emt connector,
Compression emt coupling,
Squeez flexible connector(straight and angle),
Liquid tight connector(straight and angle),
Water tight hub
Romex connector
Conduit bushing
Service entrance cap
EMTstraps(one and two holes)
Strut clamp(for emt imc and rigid)
Beam clamp, emt elbow
Conduit hanger
Steel outlet box
EMT/IMC/RIGID conduit body
IMC/RIGID coupling,
steel and zinc locknut
emt imc rigid elbows
Clevis hangers
Springier hanger
conduit nipple
water proof terminal box,etc
Why Choose Ranlic Conduit Item:
1)High quality material ensures a finish conduit and fittings with superior properties
2) Manufactured by perfect molds and professtional engineer
3) Fitted perfectly with fittings(conduits) for the CNC threading machine
4) 10 years export experience to make sure the perfect shipment date and package
5) Always like to listening customers feedback for the conduit arrived to
customer's warehouse to improving our service
Our Package:
Compression connectors are used to affix EMT conduit to a junction box or enclosure. These connectors are designed for use in dry locations. RACO compression connectors do provide concrete-tight connections.